Factory Appearing Rear Adjustable Swaybar
For Porsche 911, 912, 930
Our factory look swaybar is 3-position adjustable, allowing you to dial in the roll stiffness and understeer/oversteer characteristics you want. It’s also hollow which saves weight over solid bars of similar stiffness.
At 22mm diameter this bar is comparable to the factory 21mm Carrera solid rear bar in the softest position.
Order the matching 22mm rubber bushings part #2270030B. These fit ’78-’89 factory style swaybar mounts and clamps.
Pair with our adjustable drop links #2271002 which attach directly to the spring plate for compatibility with all steel and aluminum trailing arms.
Watch this Quick Overview
Stock 911 rear swaybar mounts have a nasty habit of tearing away from the body. Stiff sway bars and aggressive driving only accelerate the inevitable mount failure.
Replace your mounts with these super strong aftermarket mounts and solve the problem for good. Requires grinding off the factory mounts and welding for installation.
The mounts have two sets of screw holes to fit both the 66mm bolt spacing as equipped on the 1978 to 1989 cars as well as the 56mm bolt spacing as equipped on the 1965 to 1977 cars.
- Compatible with ’65-’77 clamps and ’78-’89 swaybar clamps
- Fully machined surfaces for a precision fit
- Consistent material thickness for easy installation
- Tighter tolerances, more surface area, and stronger than any other rear swaybar mounts available.
Watch this Quick Overview
Application Table
Part No. | Stock Equiv. | Fitment & Configuration |
---|---|---|
2270028 | Porsche part number "911.501.983.00"Rear swaybar mount kit, Porsche part #911.501.983.00911.501.983.00 | '65-'89 911/912/930 1 pair req'd per Car |
Links for Rear Swaybar Mount Kit
Application Table
Part No. | Stock Equiv. | Fitment & Configuration |
---|---|---|
2270030B | - | '78-'89 style chassis mounts 2 req'd per Car |
Speak to an expert: 1.408.297.2789