Von Shocks™ Coilover Shocks & Struts

For Porsche 996, 997

Coilover shocks for Porsche

Complete Coilover Kits

Complete Von Shocks™ system fully engineered and ready to bolt on. No guesswork. Tuned spring rates, shock valving, spring lengths and bump stops that all work together right out of the box.

Levels – Choose from 4 levels, each tuned with springs and valving matched to your planned usage:

  • Level 1 – Street performance, canyon carver
  • Level 2 – Autocross, Drivers Education
  • Level 3 – Time trial
  • Level 4 – Dedicated race car

Von Shocks™ Coilover Struts & Shocks For Porsche 996/997
Pair-Matched Shocks – Each and every Von shock is computer shock dyno-tested. Dyno plots are then used to choose hand-picked pairs, thus delivering unrivaled consistency and shocks that truly match.

Build Quality – Our coilover kits are track proven. Engineered and manufactured with the highest quality standards, each set is hand built to exact specifications of every order. All orders include actual dyno charts, documentation and certification.

Von Shocks™ Coilover Struts & Shocks For Porsche 996/997

Front Von Shocks™ Coilover Strut

Von Shocks™ Coilover Struts & Shocks For Porsche 996/997

Rear Von Shocks™ Coilover Rear Shock

Superb Springs – We use 2.25 inch Hypercoil springs. The same springs that are found on Indycars, ALMS, Grand Am and more. They typically measure within 1% of labeled rate. Hypercoils have a Life-Time Guarantee that coils remain within 2% of the original manufacturing tolerances.All of our coilover kits also include Helper springs. Front and rear. This springs have a very low rate and collapse under the car’s weight. Their purpose is to keep the main spring tensioned when the wheel goes to full droop under hard cornering (lifted wheel), over bumps, and on the jack.

  • “The car was quite well balanced right out of the box. Obviously you know what you are doing with spring selection.” Charles in IL, USA

Spring dividers are used between main and helper springs. They keep both springs properly aligned and centered on the shock/strut body.

Von Shocks™ Coilover Struts & Shocks For Porsche 996/997
Friction Free Setup – Each kit includes upper perch with spring seat bearing to prevent spring windup. Coilovers without this bearings can make the steering feel very heavy as the spring fights to re-center the steering. Needle bearings prevent the coil windup, and lighten the steering feel.

Adjust Ride Height – Achieve the perfect ride height and corner balance by raising or lowering the lower perch. Compact design of the threaded sleeve fits 2.25 inch springs for superior tire clearance.

Camber Plates – Camberplate kits can be ordered separately to enhance the performance of your coilover system.

Front

Application Table

Part No. Stock Equiv. Fitment & Configuration
2313601-'97-'04 996/Boxster/Cayman, Level 1
2313602-'97-'04 996/Boxster/Cayman, Level 2
2313603-'97-'04 996/Boxster/Cayman, Level 3
2313604-'97-'04 996/Boxster/Cayman, Level 4
2314201-'05-'12 997/Boxster/Cayman, Level 1
2314202-'05-'12 997/Boxster/Cayman, Level 2
2314203-'05-'12 997/Boxster/Cayman, Level 3
2314204-'05-'12 997/Boxster/Cayman, Level 4

Rear

Application Table

Part No. Stock Equiv. Fitment & Configuration
2313701-'97-'04 996, Level 1
2313702-'97-'04 996, Level 2
2313703-'97-'04 996, Level 3
2313704-'97-'04 996, Level 4
2314101-'05-'12 997, Level 1
2314102-'05-'12 997, Level 2
2314103-'05-'12 997, Level 3
2314104-'05-'12 997, Level 4

Questions? Call us at 1.408.297.2789 M-F 8-5 PST

Select quantities and click "Add To Cart" below

"" in Qty field below denotes qauntity needed per car

    Configuration Quantity Pricing

Front Parts

Von Shocks Coilovers for Porsches
Von Shocks Coilovers
$2,194.00 pair

Rear Parts

Von Shocks Coilovers for Porsches
Von Shocks Coilovers
$1,600.00 pair