|

Home
> 911 Oil Cooling
> Widemouth Oil Cooler
Widemouth Oil Coolers Fender
mounted Carrera and C2 style with Widemouth fittings

Click here
for Setrab oil coolers.
|
Widemouth
Fittings |
Regular
fittings |
Porsche
installed the highly-efficient Carrera oil cooler on the
1984-1988 3.2 liter Carreras. Similar coolers are
available from aftermarket suppliers, but they are not the
same. Aftermarket fittings are a flow-restricting 14.5 mm internal
diameter, much smaller than original factory parts!
Elephant
Racing solves the problem! We deliver the same
Carrera style cooler with our own custom "Widemouth" fittings that have a
17.5mm internal diameter. The increased fitting size
results in nearly 50% greater flow capacity.
Cooler
has tabs for mounting to factory brackets and can be used
with the factory stone guard. Fittings are factory metric type.
Don't
compromise your 911s life blood, give it the full-flow
performance intended by the factory.
Widemouth
Carrera style cooler for the '65
to '89 911 front fender. Used in combination with our finned
oil lines, Elephant Racing's Widemouth is a great solution
for tracked cars up to 3.2 liters and street cars up to 3.6 liters.
C2
style Widemouth cooler fits '90-'98 C2/C4/993 cars and provides the
same 17.5mm Widemouth fittings.
30mm
Widemouth
fittings are available for upgrading your existing Carrera or
C2 cooler. Make sure your cooler has threaded fittings before
ordering.
30mm
Widemouth fittings are also available for Setrab
oil coolers to allow easy installation into Porsche cars without
requiring AN to
metric adapters or restrictive AN-12 fittings.
Check
our External
Oil Cooling Configuration Guide for fitment information to all
911s, 1965 to 1989.
| Widemouth
Coolers complete with fittings
|
|
|
|
|
| Widemouth
Fittings
|
|
|
Setrab style Widemouth
Oil Cooler Fitting, for 911
and 914-6,
each  |
|
$40.00
|
0111100
|
|
|