Performance parts for road and track

Home > 911 Oil Cooling > Oil Cooler Mounts and Clamps

Oil Cooler Mounts and Clamps

Securely mount your cooler and lines

 Factory Oil Cooler Mounting Kit

This kit is composed of all-factory components and enables installation of the Widemouth Carrera Oil Cooler into '65-'83 911s not originally equipped with a fender mounted radiator style cooler. If you are upgrading from the SC style "trombone" or "loop" cooler, this is what you need.

The kit includes everything forward of the Finned Oil Lines.

• Lower bracket

• Upper bracket

• Rubber isolator mounts

• Inner flex hose

• Outer flex hose

Clamps

The '74-'89 external oil cooler uses one clamp in the rear wheel well, three under the door, and three in the front wheel well. It's important to have all clamps in place to avoid stressing oil lines.  Use the rubber spacers to avoid chaffing paint.

Rear wheel well

Rocker panel

Rubber spacer

1 inch oil line clamp

Front wheel well

Rubber Isolators

8mm rubber isolators for use when custom fabricating oil cooler mounts. Use these to connect your cooler to the mounts to avoid vibration damage.

Factory Oil Cooler Mounting Kit

Oil cooler mounting kit, 911 '65-'89 $179.00 1-100201053

Clamps

Oil line Rocker panel clamp, 3 required 911 $11.00 1-91120730300

Oil line clamp front wheel well, 911 $6.00 1-99951108402

Oil line clamp rear wheel well, 911 $7.50 1-91120723700

Oil line rubber spacer, 8 per car, 911 $6.00 1-96420730200

One inch oil line clamp  $4.00 0141100

Rubber Isolators

8mm Rubber isolator oil cooler mount, each $6.00 1-62187380