Home > 911 Oil Cooler Kits and parts > 911 oil lines

External Oil Cooler lines

For Porsche 911/930

Part-Finder Diagram

Porsche 911 suspension diagram

911 Oil Cooler

Need specific oil lines for your external oil cooler?

We provide OEM Porsche type oil lines as well Elephant Racing developed specialty oil lines. Our specialty oil lines provide features and advantages not available in OEM products, yet they directly replace equivalent OEM lines, you can mix and match as needed.

The oil line configurations shown here are the best choices for most when adding or upgrading an external oil cooling system for all 911/930 '65 to '89, except '72. '72 is a special case and is covered on our oil cooler kits page.

For complete oil cooler kits and oil cooler plumbing kits, visit our oil cooler kits page.

Porsche 911 External Oil Cooler lines
Porsche 911 External Oil Cooler lines, specialty Elephant Racing type

1A - Crossover Pipe - OEM type - 1-91110773910

OEM Crossover Pipe as original on 73-74 911s. Fits all 915 and G50 transaxle cars, does not fit 65-71 901/911 transaxles. Fits with 65-74 factory heat exchangers, SSIs, or headers. Does not fit 78-89 factory heat exchanger.

OEM Crossover Pipe

OEM Crossover Pipe

1B - Universal Crossover Pipe - Specialty Type - 0180000

Specialty pipe interchanges with 1A. Fits all 65-89 heat exchangers/SSI/headers. Fits with 901/911/915 transaxles, does not fit G50 transaxle. Fits all clutches including early "pusher" styles. Crosses above the transmission, clear of the clutch / exchangers and delivering superior ground clearance. Allows you to swap exchangers without touching oil lines.

Universal Crossover Pipe

Universal Crossover Pipe

2A - Oil Tank to thermostat - OEM type - 1-91110773011

OEM oil line connects oil tank to thermostat for 73-89 tanks. Can also be used with 65-71 oil tank by using our 26mm to 30mm adaptor. However, Cars 65-71 are recommended to use item 3C because they lack a wheel well channel to hold this line, tire clearance is thus limited.

OEM Oil Tank to thermostat

OEM Oil Tank to thermostat

2B - High Clearance Oil Tank to thermostat 73 to 89 - Specialty Type - 0200000

Specialty pipe interchanges with 3A and connects 73-89 oil tank to thermostat. Provides maximum clearance for fitting wide tires. Unlike the factory line that passes between the tire and the inner wheel well, this line arches above the tire to give superior tire clearance. The critical area between tank and tire is a purpose-formed hard line for maximum clearance.

High Clearance Tank / tstat 73-89

High Clearance Tank / tstat 73-89

2C - High Clearance Oil Tank to thermostat 65 to 71 - Specialty Type - 0210001

Specialty pipe interchanges with 3A and connects 65-71 oil tank (26mm fitting) to thermostat. Provides maximum clearance for fitting wide tires. Unlike the factory line that passes between the tire and the inner wheel well, this line arches above the tire to give superior tire clearance. The critical area between tank and tire is a purpose-formed hard line for maximum clearance. Cars 65-71 are higly recommended to use this line for improved tire clearance.

High Clearance Oil Tank /tstat  65-71

High Clearance Oil Tank /tstat  65-71

3A - Crossover to thermostat - OEM type - 1-91110772910

OEM oil line connects crossover pipe to thermostat. Fits all 911/930 fitted with 1A or 1B. Does not fit 72 911. Cars 65-71 are recommended to use item 2B because they lack a wheel well channel to hold this line, tire clearance is thus limited.

OEM Oil Tank to thermostat

OEM Oil Tank to thermostat

3B - High Clearance Crossover to thermostat - Specialty Type - 0210000

Specialty pipe interchanges with 2A and connects crossover pipe to thermostat. Provides maximum clearance for fitting wide tires. Unlike the factory line that passes between the tire and the inner wheel well, this line arches above the tire to give superior tire clearance. The critical area between tank and tire is a purpose-formed hard line for maximum clearance. Cars 65-71 are higly recommended to use this line for improved tire clearance.

High Clearance Crossover to tstat

High Clearance Crossover to tstat

4A - Thermostat to front wheel well supply side - OEM type - 1-93020704501

OEM oil line from thermostat to front wheel well, supply side along rocker. As equipped on 74-89 911/930, but can be used on all 65-89 except 72. For 72 visit our oil cooler kits page. This is the line that is not bent around the jack receiver.

OEM tstat to front supply side

OEM tstat to front supply side

4B - Finned oil line Oil Tank to thermostat supply side - Specialty Type - 0020001

Specialty pipe interchanges with 4A and connects from thermostat to front wheel well, supply side along rocker. Short fins on the tubing surface dissipate heat to supplement the oil cooler. Can be used on all 65-89 except 72. For 72 visit our oil cooler kits page. This is the line that is not bent around the jack receiver. More on Finned oil lines here.

Finned oil line supply side

Finned oil line supply side

5A - Thermostat to front wheel well return side - OEM type - 1-93020704601

OEM oil line from thermostat to front wheel well, return side along rocker. As equipped on 74-89 911/930, but can be used on all 65-89 except 72. For 72 visit our oil cooler kits page. This is the line that is bent around the jack receiver.

OEM tstat  to front return side

OEM tstat to front return side

5B - Finned oil line Oil Tank to thermostat return side - Specialty Type - 0030100

Specialty pipe interchanges with 5A and connects from thermostat to front wheel well, return side along rocker. Short fins on the tubing surface dissipate heat to supplement the oil cooler. Can be used on all 65-89 except 72. For 72 visit our oil cooler kits page. This is the line that is bent around the jack receiver. More on Finned oil lines here.

Finned oil line return side

Finned oil line return side

6 - Oil flex hose to cooler supply side - OEM type - 1-93020711100

OEM oil flex hose from hard line to oil cooler, supply side / longer. As equipped on 86-89 911/930, can be used on all 65-89 equipped with 4A or 4B and fender mounted oil cooler.

OEM Oil flex hose to cooler supply

OEM Oil flex hose to cooler supply

7 - Oil flex hose to cooler return side - OEM type - 1-93020711300

OEM oil flex hose from hard line to oil cooler, return side / shorter. As equipped on 86-89 911/930, can be used on all 65-89 equipped with 4A or 4B and fender mounted oil cooler.

OEM Oil flex hose to cooler return

OEM Oil flex hose to cooler return

ORDER HERE - Fill Out Table and Send To Cart

Price

Add

Configure

Oil Lines

Crossover Pipe

$

Oil tank to thermostat

$

Crossover to thermostat

$

Thermostat to wheel well supply

$

Thermostat to wheel well return

$

Flex hose supply side - OEM type - 1-93020711100

$

6 - Oil flex hose to cooler supply side

Flex hose return side - OEM type - 1-93020711300

$

7 - Oil flex hose to cooler return side

Package Total

$
youtube
Facebook

International

Fast Shipping Worldwide

+1 408.297.2789

© 2004-2013 Elephant Racing LLC, Elephant Racing LLC is not affiliated with Porsche AG